12V 100ah Gel Deep Cycle Solar Battery

Product Description

Introduction for MLG series
Sunstone MLG series battery is designed specially to meet requirement of frequent cyclic and high temperature application such as board had, PVs etc. We use high quality separator and silica from Europe. And we use special technology to fill acid firstly then after about 20 hours charge and discharge, fill out all acid then fill in silica separately to make sure each cell can get enough silica and complete penetration of electrolyte through separators and plates pastes from top to bottom.

Product Description

Nominal Voltage		12V (6 cells)			Operating Temp.Range			Discharge: -15-50°C (5-122°F)
Nominal Capacity		106AH (20hr, 1.80V/cell, 25°C/77°F)						Charge:0-40°C (32-104°F)
		100AH (10hr, 1.80V/cell, 25°C/77°F)						Storage: -15-40°C (5-104°F)
		85AH (5hr, 1.75V/cell, 25°C/77°F)			Nominal Operating Temp.Range			25 ± 3°C ( 77 ± 5°F)
		60AH (1hr, 1.60V/cell, 25°C/77°F)			Cycle Use			14.4~14.8V (25°C/77°F) Temp.Coefficient -30mV/°C
Dimension		Length 329 ± 2mm						Initial Charging Current Less than 30A
		Width 172± 2mm			Standby Use			13.5~13.8V (25°C/77°F) Temp.Coefficient -20mV/°C
		Container Height 214 ± 2mm						No limit on Initial Charging Current
		Total Height(with Terminal) 220± 2mm			Capacity affected by Temperature			40°C (104°F) 103%
Approx Weight		Approx 29.5Kg						25°C (77°F) 100%
Terminal		T5 or F7						0°C (32°F) 86%
Container Material		ABS			Self Discharge			MLG series batteries may be stored for up to 6 months
Max. Discharge Current		1000A (5S)						At 25°C (77°F) and then a freshening charge is required.
Internal Resistance		Approx 5.0mΩ						For higher temperatures the time interval will be shorter.

Features

Maintenance-free operation

Compact design

ABS case, Flame Retardant V0 is available

Stable quality and high reliability

10 years design life (at 25°C)

Detailed Photos

 

Application

Company Profile

Sunstone Power Co. was established in 2003 in manufacturing, marketing, and brand name building of lead-acid batteries/battery plates.

Our factories (both plates factory & assembling factory) locate in Kunming City, Yunnan P.R. China. Since Yunnan P.R. is one of the main lead supply

areas, we have good advantages in quality control, delivery control, and cost control. So far we are the only factory that gets pollution control

permission from the government in Yunnan P.R.

Besides this, we set up our German company in Frankfurt in 2017 and an Indonesian company in Jakarta at the end of 2018.

We have our warehouse in both these two countries. It gives fast delivery and stock support to European and Southeast Asian markets.

Partners :

Certifications

Sunstone Power has been ISO9001 ,ISO14001 approved and soon on ,many of our products obtained CE,IEC,VDS,RISTI(BY PT. TELKOM INDONESIA) certificates .

FAQ

Payment
1. Pay through T/T, western union, PayPal…
2. Price term: FOB Shenzhen port, CFR, CIF.
3. The customer is responsible for any tax or bank charges by their countries.

Packaging & Shipping
1. By sea, by air shipping, by car or train, other good shipping ways also welcomed.
2. We will send products in 30- 35 days after the bank receipt.
3. A tracking number and photos of products will send by email after arrange shipped.

Notice
1. Don't near the hot source and don't under the sunshine.
2. Don't charge in the sealed container.
3. No short circuit. It should be the additional charge if you don't use, and a single charge per three months, to avoid
irreversible sulfating. The battery should be changed when the battery jar is broken or the electrolyte omitted, to avoid acid corrosion.
4. Don't store in the space of acid gas.
5. You should be careful and regular check when using the battery. To avoid the battery don't work. You should change the battery
if the capacity is not full or has been damaged, especially after one year using.
6. Don't put the battery in the fire, or it will explode.
7. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the electrolyte.
8. Don't clean the battery by using the organic solution. (e.g. petrol)