12V Lead Acid Battery 12V 150ah Front Terminal Batteries for UPS and Data Center

• Customization: Available
• Type: Lead-Acid Batteries
• Usage: UPS, Energy Storage
• Model NO.: VGG12-150
• Nominal Voltage: 12V
• Discharge Rate: Low Discharge Rate
• Shape: Square Battery
• Electrolyte: Acid
• Installation: Fixed
• Rechargeable: Chargeable
• Dimension: 551*110*288mm
• Weight: 46.5kg
• Design Life: 12 Years
• Transport Package: Carton+Pallet
• Specification: 12V150AH
• Trademark: Sunstone Power
• Origin: China
• HS Code: 850760
• Production Capacity: 5, 000, 000 Piece / Month

Product Description

Product Specification

 Battery Basic Information

Sunstone VGG Series 12V Front Terminal GEL batteries have special sealed and valve regulated construction. All the acid inside the battery is suspended in a formulated non-woven glass mat separator and it is absorbed in the manner. This construction ensure leakproof during normal operation. There is no need to check or add water or any other specific gravity during the whole service life of the batteries, completely Maintenance Free. The grids are made by heavy duty lead calcium tin alloy. This provides: Safety margin of performance condition, Excellent recovery capacity from deep discharge, Extra service life in either cycle or float application, Low self-discharge when it is not in working.

  

Nominal Voltage		12V (6 cells)			Operating Temp.Range			Discharge: -15-50°C (5-122°F)
Nominal Capacity		158AH (20hr, 1.80V/cell, 25°C/77°F)						Charge:0-40°C (32-104°F)
		150AH (10hr, 1.80V/cell, 25°C/77°F)						Storage: -15-40°C (5-104°F)
		128AH (5hr, 1.75V/cell, 25°C/77°F)			Nominal Operating Temp.Range			25 ± 3°C ( 77 ± 5°F)
		90AH (1hr, 1.60V/cell, 25°C/77°F)			Cycle Use			14.4~14.8V (25°C/77°F) Temp.Coefficient -30mV/°C
Dimension		Length 551 ± 2mm						Initial Charging Current Less than 45A
		Width 109± 2mm			Standby Use			13.5~13.8V (25°C/77°F) Temp.Coefficient -20mV/°C
		Container Height 287 ± 2mm						No limit on Initial Charging Current
		Total Height(with Terminal) 287 ± 2mm			Capacity affected by Temperature			40°C (104°F) 103%
Approx Weight		Approx 46.5Kg						25°C (77°F) 100%
Terminal		T3						0°C (32°F) 86%
Container Material		ABS			Self Discharge			VGG series batteries may be stored for up to 6 months
Max. Discharge Current		1500A (5S)						At 25°C (77°F) and then a freshening charge is required.
Internal Resistance		Approx 4.2mΩ						For higher temperatures the time interval will be shorter.

 

Detailed Photos

Application

 

Company Profile

Sunstone Power Co. was established in 2003 in manufacturing, market, and brand-name-building of lead-acid batteries/battery plates.

Our factories (both plates factory & assembling factory) locate in Kunming City, Yunnan P.R. China. Since Yunnan P.R. is one of the main lead supply

areas, we have good advantages in quality control, delivery control, and cost control. So far we are the only factory that gets pollution control

permission from the government in Yunnan P.R.

Besides this, we set up our German company in Frankfurt in 2017 and an Indonesian company in Jakarta at the end of 2018.

We have our warehouse in both these two countries. It gives fast delivery and stock support to European and Southeast Asian markets.

Partners :

Certifications

Sunstone Power has been ISO9001 ,ISO14001 approved and soon on ,many of our products obtained CE,IEC,VDS,RISTI(BY PT. TELKOM INDONESIA) certificates .

FAQ

Payment
1. Pay through T/T, western union, PayPal…
2. Price term: FOB Shenzhen port, CFR, CIF.
3. The customer is responsible for any tax or bank charges by their countries.

Packaging & Shipping
1. By sea, by air shipping, by car or train, other good shipping ways also welcomed.
2. We will send products in 30- 35 days after the bank receipt.
3. A tracking number and photos of products will send by email after arrange shipped.

Notice
1. Don't near the hot source and don't under the sunshine.
2. Don't charge in the sealed container.
3. No short circuit. It should be the additional charge if you don't use, and a single charge per three months, to avoid
irreversible sulfating. The battery should be changed when the battery jar is broken or the electrolyte omitted, to avoid acid corrosion.
4. Don't store in the space of acid gas.
5. You should be careful and regular check when using the battery. To avoid the battery don't work. You should change the battery
if the capacity is not full or has been damaged, especially after one year using.
6. Don't put the battery in the fire, or it will explode.
7. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the electrolyte.
8. Don't clean the battery by using the organic solution. (e.g. petrol)